Furniture Assembly specialist at work
← Back to homeFurniture Assembly in the Bay Area →

Furniture Assembly in San Francisco, CA

Furniture assembly in San Francisco — desks, beds, dressers, and patio kits built without wobble.

About this service

Furniture Assembly from our team

Same-day home repair and handyman visits for San Francisco flats, Victorians, and high-rises — booked in about a minute. Furniture assembly is more than tightening screws: cam locks, drawer slides, and tall units that need wall anchors. San Francisco housing is a mix of earthquake-retrofitted Victorians, tight in-law units, and newer condos with HOA rules. We plan around steep streets, limited parking, and older plaster that does not forgive sloppy patches. GetPro sends a specialist from our team — plumber, electrician, painter, or general handyman — instead of leaving you to shop a dozen profiles. Whether you are in the Mission, Sunset, Richmond, Noe Valley, or SOMA, we group punch-list items into one visit when it saves you a second trip. Tell us the building type and any HOA constraints; we show up with the right tools and a clear plan. GetPro assembles kits across the Bay Area, flags missing hardware early, and leaves drawers gliding.

Furniture Assembly in San Francisco follows the housing on the ground: San Francisco housing is a mix of earthquake-retrofitted Victorians, tight in-law units, and newer condos with HOA rules. We plan around steep streets, limited parking, and older plaster that does not forgive sloppy patches. GetPro sends a specialist from our team — plumber, electrician, painter, or general handyman — instead of leaving you to shop a dozen profiles. Neighborhoods we know include Mission, Noe Valley, Castro, Bernal Heights.

Scope

What’s included

  • Unpack and hardware inventory
  • Assembly to manufacturer instructions
  • Leveling, squaring, and alignment
  • Wall-anchor recommendations for tall pieces
  • Packing debris break-down

Why GetPro

Why homeowners book this with us

  1. 01

    San Francisco deliveries pile up in hallways — we clear them in one visit when we can.

  2. 02

    Torque and alignment prevent next-week wobble.

  3. 03

    Same visit if you also need a TV mounted on the same trip.

Questions about furniture assembly

What’s included in furniture assembly in San Francisco?
Same-day home repair and handyman visits for San Francisco flats, Victorians, and high-rises — booked in about a minute. We handle typical furniture assembly scope and quote extras before we open walls or order parts.
How do San Francisco buildings affect furniture assembly work?
San Francisco housing is a mix of earthquake-retrofitted Victorians, tight in-law units, and newer condos with HOA rules. We plan around steep streets, limited parking, and older plaster that does not forgive sloppy patches. GetPro sends a specialist from our team — plumber, electrician, painter, or general handyman — instead of leaving you to shop a dozen profiles.
Do I choose the furniture assembly specialist myself?
No. You describe the furniture assembly job in San Francisco — we send the right person from our team.
Can you do furniture assembly same day in San Francisco?
Same-day visits are the default in San Francisco when the scope allows and a specialist is free.
How long does booking take?
About a minute. One note about the problem is enough — we confirm scope before extra work.
What if I’m not happy with the work?
Call (650) 247-5651. We’ll make it right with the same specialist or another person from our team.

Past furniture assembly work

Recent jobs from our team. Tap a photo to enlarge and browse the rest of that project.

New-home furniture assembly

Move-in assembly: sofa, bed, TV stand, wardrobe, two nightstands, a coffee table, and two chairs.

Unboxed the flat-packs after the move and built the living room and bedroom in one visit — sectional sofa, bed, TV stand, wardrobe, a pair of nightstands, coffee table, and two chairs.

Two IKEA dressers

A pair of white six-drawer IKEA dressers assembled side by side, drawers aligned.

Unboxed both units, built the cases, fitted all twelve drawers so they slide evenly, and stood the pair level against the wall.

Black wardrobe and chest

Tall black cabinet assembled with paneled doors, gold handles, and the matching chest.

Built the wardrobe, hung the doors, fitted the bottom drawer, assembled the matching chest, and set the gold hardware.

White daybed with drawers

White beadboard daybed assembled with three under-bed drawers and slats.

Built the frame, fitted the beadboard sides, set the three drawers so they slide evenly, and installed the slats.

Walnut bookshelf

Tall walnut bookcase assembled with the mixed cubbies, drawers, and open shelves.

Built the case, set the shelves and cubbies, fitted the drawers so they slide evenly, and stood the unit level.

Mesh office chairs

Two black mesh office chairs assembled, casters on, and the tilt checked.

Built both chairs — base, gas lift, seat, mesh back, and arms — then confirmed they roll, recline, and sit level.

Fluted oak sideboard

Light oak cabinet assembled with the curved ends, doors aligned, and shelves set.

Built the rounded case, fitted the fluted doors so they close evenly, set the shelves, and stood the sideboard level.

Fluted six-drawer dresser

Gray oak dresser assembled with fluted fronts, all six drawers aligned, and handles set.

Built the case, fitted all six drawers so they slide evenly, and set the hardware so the dresser sits level.

Makeup vanity and dresser

Black vanity desk assembled with the matching four-drawer chest, drawers aligned.

Built the vanity with the gold-tone legs, assembled the matching dresser, fitted the drawers, and set both pieces along the wall.

Four-drawer dresser

Black chest assembled, drawers aligned, and gold knobs set.

Built the case, fitted all four drawers so they slide evenly, and installed the hardware so the dresser sits level.

Beds, crib, and bassinet

Two upholstered beds assembled, plus a wood crib and a bassinet stand.

Built both boucle bed frames with slats and headboards, assembled the crib to spec, and put the bassinet together so the nursery was ready the same visit.

Drop-leaf dining table

Wood dining table assembled with the drop-leaf hinges working and the top sitting level.

Attached the legs to the apron, set the drop-leaf hinges, and stood the table so both leaves fold cleanly and the top does not rock.

Standing desk assembly

Electric sit-stand desk assembled, leveled, and the lift checked.

Unboxed the frame, mounted the top, wired the motor, and confirmed the desk raises and lowers smoothly.

Patio set and fire pit table

Wicker sofa set assembled under the pergola, two chaise lounges, and a propane fire pit table.

Built the wicker sofa, chairs, and coffee table, assembled two sling chaise lounges with a side table, and put together the propane fire pit table with the cover on.

Garage cabinet repair

Broken wardrobe rebuilt in the garage — side panel, shelves, and doors put back on.

The case had pulled apart at the joints. We rebuilt the frame, reinforced the damaged corners, set the shelves, and hung both doors so the cabinet stands square again.

Office bookshelf

Three-section bookcase assembled with open shelves above and cabinets below.

Built the frames, set the shelves and cabinet doors, and stood the unit on the wall so the columns line up and the doors close flush.

Walnut TV stand

Low media console assembled, doors aligned, and set on the living-room wall.

Unboxed the console, built the case and slatted doors, fitted the metal legs, and set it level against the wall so the doors close even.

Backyard planter trellises

Six wooden planter boxes with trellis screens assembled and lined up by the pool.

Unboxed the kits, built each planter and screen, and set the row on the patio so the boxes sit level and the slats line up.

IKEA office storage

Cabinets, cubby shelf, and a wall of storage built and set in the office.

Unboxed the IKEA units, assembled the sideboards, cubby shelf, and modular wall of cabinets, and aligned the doors so everything sits square against the walls.

Poolside lounge chairs

Two wicker chaise lounges assembled and set by the pool with cushions on.

Unboxed the frames, built both chaises with the side tables, fitted the cushions, and set them on the pool deck so they sit square and stable.

TV stand with fireplace

Media console assembled with the electric fireplace insert and cabinet lights working.

Built the white console, set the fireplace insert, wired the side-cabinet lights, and checked that the flames and LEDs come on once the unit is square and level.

Rooftop outdoor furniture

Dining table and six chairs assembled and set on the rooftop patio.

Unboxed the set, built the table and chairs, and arranged them on the rooftop so the hardware is tight and the set sits level.

Outdoor cat enclosure

Walk-in catio assembled, leveled, and set on the patio with shelves and a door that latches.

Unboxed the kit, built the mesh panels and platforms, and squared the enclosure so it sits stable on the patio with a door that closes and latches cleanly.

Folding cabinet bed

Cabinet bed assembled so it folds closed as a chest and opens into a sleeping platform.

Built the case, set the hinges and platform, and checked the fold so it opens flat, closes flush, and the drawers sit even.

Bed frame assembly

Pine bed frame built, slats set, and the mattress placed so the frame sits square and stable.

Unboxed the frame, assembled the headboard and rails to spec, laid the slats, and checked that the bed doesn’t rock once the mattress is on.

TV stand assembly

Media console built, doors aligned, and hardware set so the unit sits level.

Assembled the case, hung the doors, and checked that drawers or doors close even and the top sits flat for a TV.

Writing desk assembly

Desk built with drawers aligned and the top set square and level.

Assembled the pedestal, fitted the drawers and slides, and joined the top so the desk sits solid without a wobble.

Backyard trampoline assembly

14-foot trampoline built on the lawn — frame, springs, pad, enclosure net, and ladder.

Unboxed the kit, assembled the frame and jumping mat, set the spring pad and safety net, and confirmed the enclosure zips and the ladder sits stable.

Bedroom move-in assembly

Upholstered bed, a pair of nightstands, and an armchair built for a first night in the new house.

Unboxed the set, assembled the bed frame and slats, built both nightstands, and put the armchair together so the room was usable the same day.

Shoe cabinet, hangings, and bike racks

Desk and shoe cabinet assembled, pictures and a mirror hung, plus bike racks and a bathroom towel bar.

Built the desk and wall-anchored the shoe cabinet, hung the mirror and art, mounted bike hangers in the garage, and set a towel bar in the bath — one punch list, one visit.

Closet bookshelf install

Bookcases assembled and fitted into a closet alcove.

Built the cases, set the shelves, and seated the unit in the closet opening so it sits flush with the trim and plumb to the walls.

Six-drawer dresser

Tall dresser built, drawers aligned, and set in the bedroom.

Assembled the case, installed slides, and fitted all six drawers so they run even and the unit sits level against the wall.

Move-in furniture assembly

Table, chairs, cabinets, dresser, and a bed built for a first night in the new place.

Unboxed the flat-packs and assembled the bedroom, storage, and dining pieces in one visit so the new place was usable the same day.

Office desk and file cabinets

L-desk, pedestal, and lateral files built and set as one office.

Unboxed the L-desk and file cabinets, assembled to spec, aligned drawers and slides, and placed the set so the printer and files sit next to the desk without a wobble.

Nightstand assembly

A pair of USB nightstands assembled, drawers aligned, and hardware checked.

Built two matching side tables from the box, squared the cases, aligned drawers, and confirmed the USB ports sit flush before we left.

Raised garden bed

Outdoor planter assembled, leveled, and set on casters.

Built a raised garden bed from the kit, tightened hardware for outdoor use, and confirmed it rolls and sits level on the patio.

Murphy bed repair

An older wall bed repaired, reassembled, and aligned so it opens and closes safely.

This wasn’t a new install — hardware had worn out. We repaired damaged parts, re-secured the mechanism, and verified alignment so the bed sits solid when deployed.

Dresser assembly

Three dressers built, drawers aligned, and units leveled in a Bay Area bedroom.

Assembled three dressers to spec, squared the cases, and checked drawer slides so everything opens smoothly and sits solid on the floor.

Crib assembly

Crib built to manufacturer specs and checked for a snug, stable setup.

Hardware inventory, assembly to the instructions, and a stability check so rails and base sit square and tight.

Dining table assembly

Large dining table aligned, hardware torqued, and leveled in place.

Joined the base, secured hardware, and verified the top sits flat so it doesn’t rock under a full place setting.

Outdoor furniture setup

Patio seating assembled and spaced around an outdoor fire pit.

Built outdoor chairs and a bench, tightened hardware for weather use, and set a comfortable layout on the patio.

Cities

Same service nearby

GetPro Services works across the San Francisco Bay Area. Open a neighboring city for the same service.

Neighborhood notes and other trades we cover in San Francisco: Handyman services in San Francisco, CA

Book a visit

Get a free estimate in San Francisco

Or call (650) 247-5651 — 24/7 Bay Area support.

Call